Avtron AV56S THIN-LINE III™ Encoders

Avtron AV56S THIN-LINE III™ Encoders


  • Heavy Mill Duty
  • Simple, Secure Installation
  • All models are protected against all short circuits and wiring errors
  • Wide-Gap Technology: No Sensor Scraping or Adjustment
  • Up to 50000 PPR
  • No Couplings or Bearings
  • Sealed Electronics
  • Self-Diagnostic LED and Alarm Output
  • Universal 5-24V Operation
  • 3 Year No-Hassle Warranty
Outline Drawing

AV56S THIN-LINE III™ heavy mill duty modular magnetic encoders are designed for washdown and marine duty and fit a standard 4.5" motor flange. Other THIN-LINE III models, ranging from 115mm to 8.5", are available to fit other motor sizes.

THIN-LINE III encoders feature simple installation, durable construction, and clear diagnostics to eliminate encoder-related downtime:

First, the magnetic sensors are fully potted, to withstand dirt and liquids. No glass disks, no optics to clog. There are no moving, wearing parts!

The patented Wide-Gap™ rotors put an end to sensor damage, are simpler to install, and stay securely mounted to the shaft.

The universal 5-24V design drives longer cables and is protected against wiring errors and surges.

When you power up an AV56S, you know you installed it right: the green light tells you the digital self-tuning has set your AV56S optimally.

If at any time, the AV56S cannot produce ideal signals, the light changes to red and the remote alarm contact activates. If there are wiring errors, the LED will change to orange.  However, the encoder keeps working as long as possible to give you time to schedule service.

With a real-world installation history of over 4,500,000 hour MTBF, AV56S encoders will keep your machine running 24/7/365!

Operating Power: Volts: 5 - 24 VDC; Current: 80mA, no load
Output Format: A Quad B with Marker (A,A–, B,B–, Z,Z–)
Second Isolated Output: Optional
Frequency Range: @5V, @1m cable, 250 kHz Max
                               @24V, @300m cable, #8 output, 45 kHz Max   
Maximum Cable Length: 1000'/300m 
PPR:  4 - 50000
Speed: 5400 RPM Max. std., for higher speeds, consult factory
Electronics: Fully Encapsulated, IP67 (see manual for details)
Temperature: -40° to 100°C (150°C rotor)
Vibration: 18 g’s
Shock: 1 meter drop test
Chemical: Polyurethane enamel paint protects against salt spray, mild acids, and bases.
Weight:  5 - 6 lbs [2.2 - 2.7 kg]

All dimensions are in inches [millimeters]; Specifications and features are subject to change without notice.
  • Replaces Avtron M56S, Northstar/Dynapar™ D5, D560, SL56; online cross reference guide available
  • Shrugs off dirt, oil, and water contamination
  • Highly resistant to electrical and magnetic motor and brake noise
  • If damaged, electronics can be replaced without removing rotor
  • Built-in motor position guide and diagnostic check
  • No air gap adjustment required
  • AV56S features stainless steel for washdown and marine applications
  • Sealed thru-shaft option
  • Fits shafts 0.500" - 3.188" [10 - 85 mm]
  • 4,500,000+ hour MTBF design
Industry General Food & Beverage Pulp & Paper Wood Products Wind Power Crane & Hoist Metals Mining Marine Oil & Gas

Light Mill Duty

AV20, AV25, AV32, AV6A, AV6M, HS25A, HS35A, HS6A, HS6M, K661,

Mill Duty

AV32, HS35M, K661, M185, M3, M3(small), RAHS35M

Heavy Mill Duty

AV115, AV125, AV45, AV5, AV56, AV56S, AV67, AV85, AV850, AV850Test, AVSK, Carlen Replacement, HS45, K661, M4, M4(small), XR115, XR12, XR125, XR45, XR4F, XR5, XR56, XR85, XR850, XR97, XRB1, XRB2

Severe Mill Duty

AV12, AV30, AV485, AV5, AV685, Carlen Replacement, HS40, K661, M484, M6, M6C, M7, XR12, XR485, XR5, XR685, XR97, XRB1, XRB2,
Avtron's AV56S encoders directly replace competitive models, including:

Encoder Products Corporation (EPC): 770

Lakeshore/Northstar: SL56, S5, D5, ST5

Madison Electric: HPRT

And other 4.5" C-face mount encoder models including Avtron's older M56S model.
For direct model replacements, try our cross reference page
Contact Us
Adobe Reader

In This Section

  • A Quad B

    A Quad B refers to the set of output quadrature signals from an incremental quadrature encoder to indicate speed and direction, including complements: A, A NOT, B, B NOT (, , , ). Most Avtron encoders offer A Quad B output at no extra cost.  For more information on quadrature- Wikipedia: http://en.wikipedia.org/wiki/Quadrature_phase

  • Cam Screw Rotor™

    A Cam Screw Rotor eliminates the problems associated with slipping rotors of other types; it uses two cam (eccentric) head screws. The screws are preloaded into the rotor; simply rotate them (approximately 90°-180°) to fully engage the shaft (4-6 ft-lbs) using a standard hex (Allen) wrench. Cam screw rotors are available on AV850, AV56, AV67, AV85, and AV115 THIN-LINE II™ encoders. Cam Screw Rotor Patent # 7,485,997. Cam Screw Rotor™ is a trademark of Avtron.

  • Encoder

    A device which indicates position and speed via a set of digital outputs. Incremental encoders output quadrature (A Quad B) signals, and may add a marker pulse once per revolution.  Absolute encoders typically indicate position via a digital message, a set of parallel outputs, or analog values.

  • Heavy Mill Duty

    Heavy Mill Duty encoders are designed to withstand temperature cycling, extreme temperatures, contaminants, bearing loads, and physical force.

  • Industrial EPIC

    The preferred encoder connector of most users in North America. It contains a full size terminal strip and, unlike the MS connector, requires no soldering for quick field connections. Avtron offers pin-for-pin exact replacements for competitors’ models using industrial EPIC® style connectors. EPIC® is a registered trademark of the Lapp Group.

  • Magnetic Encoder

    Magnetic and magnetoresistive encoders typically use a magnetized rotor with north and south poles lined up around the perimeter of the disk. A magnetoresistive sensor detects the transitions, and these are the counts or pulses generated by the encoder. Magnetic encoders withstand dirt, dust, water, and temperature changes far better than optical encoders.

  • Magnetic Rotor

    A magnetized disk with multiple north and south poles lined up around the perimeter of the disk. A magnetoresistive sensor detects the transitions and generates the pulses generated by the magnetic encoder.

  • Magnetoresistive Sensor

    A sensor that detects the magnetic poles on an encoder's magnetic rotor and transforms them into pulses. Avtron magnetoresistive (MR) sensors use advanced technology to reject external magnetic signals such as brake solenoids and motor magnetic fields. MR sensors enable Avtron magnetic encoders to ignore dirt, oil, water, and other contaminants.

  • Modular Encoders

    Modular Encoders mount to a machined C-face or flange adapter on the motor (drive or non-drive end). Modular encoders consist of a rotor that mounts on the shaft, and a stator that bolts to the motor frame. Modular encoders are very rugged, and Avtron encoders feature Wide-Gap sensors to avoid complex shimming or fitting to the motor. Modular C-face encoders are typically used on DC motors; but some AC motors, such as Rockwell’s RPM III AC and Marathon’s Blue and Black Max motors, have C-faces standard on the non-drive end for mounting an encoder.

  • NEMA 56C

    A NEMA 56C face or flange mount, also known as bearingless or pancake encoder, is a 4.5" flange with (4) bolts located in a 5.88" circle. Originally designed as the standard for mounting solid shaft, coupled tachometers on flange adapters, the NEMA 56C is also a standard for mounting modular encoders. Avtron AV56 THIN-LINE II™ encoders mount on NEMA 56C faces. Marathon Blue Max and Black Max AC motors feature a NEMA 56C face on the non-drive end.

  • Wide-Gap Technology

    Avtron encoders use special optical sensors and magnetoresistive sensors, combined with proprietary circuit designs to allow the sensor to be located much farther from the magnetic rotor or optical disk. This eliminates sensor crashes and makes mounting easy and forgiving of mechanical variation.

Contact Avtron

Contact Us