Avtron HS35M Encoders

Avtron HS35M Encoders

Magnetic Durability at a Great Price!

  • Fits shafts 1/2" to 1 1/8"
  • Simple Installation
  • Up to 3072 PPR
  • Replaces Competitive Models without Rewiring
  • No Solder Industrial EPIC Connector Available
  • Fits end of shaft and through shaft applications
  • High Power Outputs Available
  • -20°C to +85°C Operation
  • Optional Dual Isolated Outputs
  • Fully Insulated from Motor Shaft Currents
  • 2 Year No-Hassle Warranty
Outline Drawing

HS35M encoders fit shafts from 1/2" to 1 1/8" [12mm to 30mm] easily, using a durable shaft insert. Models from 1/2" to 1" [12mm to 20mm] may be resized by replacing the insert, enabling our factory, distributors, and customer stockrooms to swiftly meet any need. The engineered resin housing is immune to most chemicals, and eliminates any possibility of shaft current or grounding problems.

Avtron encoders have superior shaft seals and bearings that stay sealed to keep out contamination caused by temperature cycling and liquid sprays. The HS35M offers high power outputs that can drive cables over 1000’ [300m] with full short circuit and overvoltage protection!

The HS35M features two large bearings, one at each end of the enclosure for strength and resistance to damage. Many competitors use only a single bearing, or two tiny bearings side by side.

Often, optical encoders fail because of dust or water contamination that prevents the sensor from seeing the optical disk. The HS35M advanced magnetic technology sees through contamination and the fully sealed circuit design ensures your machine keeps working, even in mill environments.

The HS35M offers magnetic performance and moisture resistance, in a compact package, and for a great price. Select an Avtron HS35M and upgrade your machine today!

Operating Power: Volts: 5 - 24 VDC; Current: 80mA, no load
Output Format: A Quad B with marker (A,A–, B,B–, Z,Z– )
Frequency Range: 0 to 165 KHz
PPR: 1 - 3072 standard (for other PPR needs, consult factory)
Speed: 4700 RPM Max., (for higher speeds, consult factory)
Temperature: -20° to 85°C
Environmental: IP65; NEMA 13 Rating
Vibration: 5-2000Hz, 20Gs
Shock: 50G, 11mS duration
Weight: Single: 1.4 lbs. [635 g] Dual: 2.0 lbs. [905 g]
Certifications:  CE


All dimensions are in inches [millimeters].

Specifications and features are subject to change without notice.
  • All digital, design; no adjustments or potentiometers
  • Innovative shaft ring retains collar during installation
  • Advanced sensor technology
  • Dual bearings, spaced farther apart, with synthetic
    lubricant for longer life
  • No extra charge for signal complements and marker pulse (A,A–, B,B–, Z,Z–)
  • Fully insulated from motor shaft currents
  • Models 1/2" to 1" [12mm-20mm] can be resized by interchanging inserts
  • Optional basket guard adds even more protection
Industry General Food & Beverage Pulp & Paper Wood Products Wind Power Crane & Hoist Metals Mining Marine Oil & Gas

Light Mill Duty

AV20, AV25, AV32, AV6A, AV6M, HS25A, HS35A, HS6A, HS6M, K661,
                   

Mill Duty

AV32, HS35M, K661, M185, M3, M3(small), RAHS35M
                   

Heavy Mill Duty

AV115, AV125, AV45, AV5, AV56, AV56S, AV67, AV85, AV850, AV850Test, AVSK, Carlen Replacement, HS45, K661, M4, M4(small), XR115, XR12, XR125, XR45, XR4F, XR5, XR56, XR85, XR850, XR97, XRB1, XRB2
                   

Severe Mill Duty

AV12, AV30, AV485, AV5, AV685, Carlen Replacement, HS40, K661, M484, M6, M6C, M7, XR12, XR485, XR5, XR685, XR97, XRB1, XRB2,
                   
Avtron's HS35M encoders directly replace competitive models, including:

BEI:  HS35, XHS35

Dynapar:  HS35, HS35R
Lakeshore/Northstar:  HSD35, HSD37, HSD38, HSM38, Magcoder, MH

Encoder Product Corporation (EPC):  260, 702, 725, 755A

And other 3.5" hollow shaft mount encoder models that fit up to 1 1/8" shaft sizes [30mm].

For direct model replacements, try our cross reference page
or
Contact Us
Adobe Reader

In This Section

  • A Quad B

    A Quad B refers to the set of output quadrature signals from an incremental quadrature encoder to indicate speed and direction, including complements: A, A NOT, B, B NOT (, , , ). Most Avtron encoders offer A Quad B output at no extra cost.  For more information on quadrature- Wikipedia: http://en.wikipedia.org/wiki/Quadrature_phase

  • Anti-Rotation Arm

    A device used to prevent hollow shaft encoders from spinning with the shaft rotation. It is also called a tether or a torque arm. To prevent encoder bearing damage, anti-rotation arms are very flexible and permit all movements, including axial shaft movement but not rotation.

  • Axial Shaft Movement

    Motor shaft movement in or out, relative to the ends of the motor. Often motors that use roller or sleeve bearing construction have more axial shaft movement. Most Avtron modular encoders tolerate +/- 0.050" of axial movement maximum. Use hollow shaft encoders for high axial movement motor styles, such as MD motors. Most competitors’ modular encoders tolerate much less axial movement than Avtron products.

  • Encoder

    A device which indicates position and speed via a set of digital outputs. Incremental encoders output quadrature (A Quad B) signals, and may add a marker pulse once per revolution.  Absolute encoders typically indicate position via a digital message, a set of parallel outputs, or analog values.

  • Hollow Shaft

    Hollow Shaft encoders mount by passing the shaft of the motor into or through the encoder. Hollow shaft encoders are easy to mount and replace but are vulnerable to damage. Also, the weight of the encoder must be considered for small motor shafts < 0.75" diameter. Avtron offers a full range of hollow shaft encoders, including: AV685, HS25A, HS35A, HS35M, M3, M4, M6, M7, XP45.

  • Industrial EPIC

    The preferred encoder connector of most users in North America. It contains a full size terminal strip and, unlike the MS connector, requires no soldering for quick field connections. Avtron offers pin-for-pin exact replacements for competitors’ models using industrial EPIC® style connectors. EPIC® is a registered trademark of the Lapp Group.

  • Light Mill Duty

    Light Mill Duty encoders are designed for industrial applications but must be protected from contamination, temperature cycling, and physical force, including shock, vibration, and bearing loads. Examples include AV20, AV25, HS25A, and HS35A models.

  • Magnetic Encoder

    Magnetic and magnetoresistive encoders typically use a magnetized rotor with north and south poles lined up around the perimeter of the disk. A magnetoresistive sensor detects the transitions, and these are the counts or pulses generated by the encoder. Magnetic encoders withstand dirt, dust, water, and temperature changes far better than optical encoders.

  • MS Connector

    The most used encoder connector style in North America. Available in 6, 7, and 10 pin versions, with 10 pins being the most common. Avtron offers pin-for-pin exact replacements for competitors’ models using MS connectors. MS connectors are extremely reliable but require soldering. Many users prefer industrial EPIC ® style connectors instead. EPIC® is a registered trademark of the Lapp Group.

  • Shaft Runout

    The wobbling motion produced by a shaft that is not perfectly true and straight. Shaft runout is often abbreviated T.I.R. (Total Indicated Runout).

  • Stub Shaft

    The portion of the shaft (often on the non-drive end of the motor) used to mount an encoder. To add an encoder to a motor or other shaft that lacks enough extra shaft length to install the encoder, an additional shaft length is added. The stub shaft is threaded into the center of the motor shaft, or the existing motor shaft is enclosed in a sleeve that grips the shaft. Avtron offers many standard and custom stub shafts.

  • Wide-Gap Technology

    Avtron encoders use special optical sensors and magnetoresistive sensors, combined with proprietary circuit designs to allow the sensor to be located much farther from the magnetic rotor or optical disk. This eliminates sensor crashes and makes mounting easy and forgiving of mechanical variation.

Contact Avtron

Contact Us